1. When using a four-wheel mobile hydraulic lifting platform, this equipment must be placed on a flat and solid ground, mainly to prevent the lifting equipment from malfunctioning during its work. The use of lifting equipment must be in accordance with the specified load of the equipment, and it is strictly forbidden to reuse the equipment when using hydraulic construction lift equipment. The hydraulic docking bridge is a special auxiliary equipment for fast loading and unloading of goods. Its height adjustment function enables a bridge between the truck and the cargo platform of the warehouse. The forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading through it. Called the loading and unloading platform. In emergency situations, up to 10% is allowed in a short period of time, and exceeding this amount is strictly prohibited. You use the lifting platform to transport the goods and try to distribute the weight evenly in the center of the table. The hydraulic lifting platform is driven by steel wire ropes and is mostly used to transport goods. It is composed of tower, hanging basket, hoist, etc. The tower is generally a truss structure, which is pulled by cables to keep it upright. The hanging basket is welded with section steel and is a container for loading goods. The hoist is fixed on the ground, the wire rope is connected to the gondola through the pulley on the top of the tower, and the gondola is pulled to run up and down, and the operator controls it on the ground. Under special circumstances, prejudice is allowed. However, it must be noted that part of the load must be about 300 from the lifting device of the platform. The rated load of the transverse partial load shall not exceed 1/3 of the load, and the rated load of the longitudinal partial load shall not exceed 1/2 of the load. 4, lifting equipment, pipes and other easy-to-coil materials must be compressed or tightly pressed to ensure stability. platforms without manned protection must be strictly prohibited. The manned lifting platform must be equipped with anti-crack valves and auxiliary equipment. The setting of the anti-crack valves can prevent the accident of the hydraulic lifting table from falling out of control when the equipment pipe is broken, and can ensure the safety of the equipment when the equipment pipe is broken. When operating the lifting cage
platform, only in strict accordance with the operating requirements, the equipment can operate normally, and at the same time ensure the safe and normal use of the hydraulic lifting equipment. The hydraulic docking bridge is a special auxiliary equipment for fast loading and unloading of goods. Its height adjustment function enables a bridge between the truck and the cargo platform of the warehouse. The forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading through it. Called the loading and unloading platform.
Anxious in finding a solution to your suspended working platform issue? Click Powerston Construction Equipment to find a top construction hoist suppliers
suspended working platform company offering top quality .
Wuxi Powerston Technology Co.,Ltd is one of the best provider in China offering online suspended working platform
consultation and products to boost your building material hoist. Visit Powerston Construction Equipment and place your order now.
As the full potential of construction hoist
suppliers lies in , the demand for is increasing globally, and is being adopted across the global market.
Wuxi Powerston Technology Co.,Ltd, a manufacturer of suspended working platform, might emphasize less hassle or less wasted time rather than emphasizing reliability or quality.