The high-altitude lift is a four-wheel mobile walking with vertical lift. The main structure of the scissor fork is a Shanghai manganese steel rectangular tube. The workbench is wide, the structure is firm, and the load capacity is high. The hydraulic lifting cage
platform is driven by steel wire ropes and is mostly used to transport goods. It is composed of tower, hanging basket, hoist, etc. The tower is generally a truss structure, which is pulled by cables to keep it upright. The hanging basket is welded with section steel and is a container for loading goods. The hoist is fixed on the ground, the wire rope is connected to the gondola through the pulley on the top of the tower, and the gondola is pulled to run up and down, and the operator controls it on the ground. The lifting cage is stable, the installation and maintenance are simple, and it can work at the same time, which makes the high-altitude operation safer and more effective. According to its use environment and use requirements, different power combinations can be selected, different optional configurations can be selected, tasks such as upgrading projects can be completed, and better use results can be achieved. By increasing the number of lifting cage platforms, the height that the lifting platform can reach is increased. The platform adopts hydraulic lifting control, which can be operated up and down. The hydraulic lifting power unit-joint venture pump station is divided into hydraulic lifting control and power supply system. In addition, it is also equipped with a manual hydraulic pump. Power failure can achieve the purpose of lifting equipment through manual mode. This machine is equipped with non-easy degree of insulation to ensure the safety of goods and personnel, easy to replace, easy to clean, and the overall atmosphere is beautiful. Various branch roads often need to use high-altitude working platform vehicles. In order to improve the service life of the high-altitude working platform vehicle, in addition to correct use, the components of the high-altitude working platform vehicle must be adjusted correctly and necessary maintenance. In high-altitude operations, regular inspections and regular lubrication are very important for daily maintenance. Adjustable, once a week. When installing new lubricating oil for the first time, you must change the lubricating oil after 1/2 week of operation, and replace the lubricating oil every 6/7 months thereafter. Regularly check the auxiliary status and lubrication status. According to national standards, the braking distance of the anti-fall safety device is 0.25/min. But it is not that the shorter the braking distance, the better. On the contrary, the shorter the braking distance, the greater the impact force and the greater the damage to the mechanism, especially the high-speed lifting platform, which is particularly harmful. Since the current relevant national standards have not made new regulations on the braking distance of high-altitude lift, the braking distance of ordinary high-altitude construction lift is obviously unreasonable. For ordinary lifting, the braking distance should be controlled between 0.6m and 1.4m, and the braking distance should be controlled within 0.6m to 1.4m. The on-site adjustment of the braking distance must follow the following principles: The anti-fall safety device must be within the effective standard period; it must be adjusted with the manufacturer’s consent or under the guidance of the manufacturer’s professionals; after the adjustment, it must be re-established according to the drop test conditions. test. The hydraulic lifting platform is driven by steel wire ropes and is mostly used to transport goods. It is composed of tower, hanging basket, hoist, etc. The tower is generally a truss structure, which is pulled by cables to keep it upright. The hanging basket is welded with section steel and is a container for loading goods. The hoist is fixed on the ground, the wire rope is connected to the gondola through the pulley on the top of the tower, and the gondola is pulled to run up and down, and the operator controls it on the ground. The hydraulic docking bridge is a special auxiliary equipment for fast loading and unloading of goods. Its height adjustment function enables a bridge between the truck and the cargo platform of the warehouse. The forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading through it. Called the loading and unloading platform.
Wuxi Powerston Technology Co.,Ltd is a gaint manufacturer of suspended working platform
, which is one of the most outstanding product produced from us.
If you follow these straightforward steps you can keep your construction hoist suppliers
building material hoist. I think this article will help you make a wise decision on choosing the right .
We believe in keeping the customers happy and providing them with suspended working platform at a very competent price.
Our company is professional in manufacturing suspended working platform especially construction hoist suppliers.