1 The use of the lifting platform must be equipped with professional operators who have undergone special training, passed examinations, and hold certificates. The operator of the lifting cage
platform platform must perform all inspections and maintenance before starting the lifting platform in accordance with the maintenance regulations of the mechanical equipment, and check the working range of the lifting platform vehicle before work, and remove obstacles that hinder the lifting platform and the lifting vehicle from turning and walking. . Support is an important preparatory work for the operation of the lifting platform. Flat ground, such as soft ground or uneven ground, should be selected, and the work must be carried out with solid cooperation. The hydraulic docking bridge is a special auxiliary equipment for fast loading and unloading of goods. Its height adjustment function enables a bridge between the truck and the cargo platform of the warehouse. The forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading through it. Called the loading and unloading platform. The lifting cage platform should usually start from the lower arm first, then from the middle arm, and finally from the upper arm. The hydraulic lifting platform is driven by steel wire ropes and is mostly used to transport goods. It is composed of tower, hanging basket, hoist, etc. The tower is generally a truss structure, which is pulled by cables to keep it upright. The hanging basket is welded with section steel and is a container for loading goods. The hoist is fixed on the ground, the wire rope is connected to the gondola through the pulley on the top of the tower, and the gondola is pulled to run up and down, and the operator controls it on the ground. In the lifting platform rotation operation, the lower arm must be rotated after a certain height, and the rotation should be slow. At the same time, attention should be paid to the distance between the shear arm and the platform and the equipment to meet safety requirements. The operator on the work platform should wear a safety belt. The hydraulic docking bridge is a special auxiliary equipment for fast loading and unloading of goods. Its height adjustment function enables a bridge between the truck and the cargo platform of the warehouse. The forklift and other handling vehicles can directly drive into the truck for bulk loading and unloading through it. Called the loading and unloading platform. When working in the same area, the car body should be grounded as required, and the climbing operation of the lifting platform should be guided by the person in charge of the work. The supervisor should contact the operator of the lifting platform according to the standard signal. The signal must be clear and accurate. Before the landing platform is operated, the person in charge of the work shall provide technical and safety explanations to the operators, including: work content and requirements; safety precautions and dangerous points; personnel division and scope of responsibility. In addition to inspecting the condition of the vehicle and the operating personnel, the person in charge of the work should also be responsible for checking the terrain, environment, take-off and landing according to the requirements of the safety technical measures or the pre-made work plan. If there is any difference, it should be made before the start of the work. Appropriate measures. If there is a conflict with the regulations of the country or industry, the regulations of the country or industry shall be implemented.
Wuxi Powerston Technology Co.,Ltd thinks that a good rule of thumb to determine whether you're working on a project.construction hoist suppliers
are the in thing today. To buy a for yourself do visit Wuxi Powerston Technology Co.,Ltd at Powerston Construction Equipment.
suspended working platform has a very good repute over the global market.