Static inspection means that the mechanism does not need to do any action, and the lifting cage
platform does not need to be in working condition, mainly through testing instruments and sensory organs, mainly including the following items: 1. The inspection of mechanical parts is to observe the degree of wear of the wire rope by the technicians on the hydraulic platform, the number of broken wires and broken wires, the hydraulic end of the wire rope, the amount of abrasion and safety margin of the wire rope, and the random winding of the wire rope on the drum and slot-hopping Happening. Arrangement and other phenomena 2. The hydraulic lifting platform is driven by steel wire ropes and is mostly used to transport goods. It is composed of tower, hanging basket, hoist, etc. The tower is generally a truss structure, which is pulled by cables to keep it upright. The hanging basket is welded with section steel and is a container for loading goods. The hoist is fixed on the ground, the wire rope is connected to the gondola through the pulley on the top of the tower, and the gondola is pulled to run up and down, and the operator controls it on the ground. The boarding bridge is used for bridge equipment between forklifts and trucks to facilitate loading and unloading of goods. Maximum dynamic load: 6T, maximum static load: 6T, maximum width: 2M, maximum length: 4M. There are many categories, generally divided into mobile docking bridges and fixed docking bridges. Conventional: solid tires with a length of 11M and a width of 2.1M. Structural inspection is a direct inspection of the metal structure of lifting cage equipment, such as legs, rods, arms and other structures and welding seam deformation, cracks, cracking, etc., pin and bolt damage, cracking, etc. The mobile elevating platform performs dynamic detection under certain working conditions, mainly including rated load and no-load. 1 In the rated load test, according to the working condition of the lifting platform, choose the weight equivalent to the rated lifting cage to replace the test block used in the load test, and then carry out the test of rated load 2. The boarding bridge is used for bridge equipment between forklifts and trucks to facilitate loading and unloading of goods. Maximum dynamic load: 6T, maximum static load: 6T, maximum width: 2M, maximum length: 4M. There are many categories, generally divided into mobile docking bridges and fixed docking bridges. Conventional: solid tires with a length of 11M and a width of 2.1M. In the no-load test, all components and the boom of the lifting equipment are raised to the limit to make them rise and fall.
The increasing consumption demand in key segments such as building material hoist, construction hoist suppliers
and building material hoist have been driving the sales of and its derivatives worldwide.
And finally, if you want to find additional resources for suspended working platform
, simply go to Powerston Construction Equipment for more.
These construction hoist suppliers suspended working platform are not only useful but also more cost effective than those traditional ones.