There are many types of cranes, and in different places, there are also many different types of cranes used in different places. Single-beam bridge cranes and double-beam cranes in cranes are two larger categories. In addition to the simple main In addition to the number of beams, there are also many differences in other aspects. So, today we will take a look at the operating precautions for single-beam bridge cranes. There are many types of cranes, and in different places, there are also many different types of construction hoists
used in different places. Single-beam bridge cranes and double-beam cranes in cranes are two larger categories. In addition to the simple main In addition to the number of beams, there are also many differences in other aspects. So, today we will take a look at the operating precautions for single-beam bridge cranes. 1. Precautions for safe operation before work: 1. Before the single-beam bridge crane with a cab and the driver take over to drive, the hooks, wire ropes and safety devices should be checked according to the requirements of the check card. If abnormal conditions are found, they should be checked. Be excluded. 2. For ground-operated single-beam bridge cranes, each shift should have a special person responsible for inspection according to the requirements of the check card, and abnormal conditions should be eliminated if they are found. 3. The operator must confirm that there is no one on the platform or track before turning on the main power supply. When the power circuit breaker is locked or there is a notice board, the main power supply can be turned on only after the original person concerned removes it. 2. Precautions for safe operation at work: 1. When lifting heavy objects for the first time in each shift (or when the load reaches a large weight), the heavy objects should be lifted 0.5 meters above the ground, and the brake performance should be checked. After confirming the reliability, proceed to normal operations. 2. Strictly implement the 'ten no hanging' system: ①The command signal is not clear or the command is not hoisted; ②Do not hoist when the rated lifting capacity is exceeded; ③The spreader is used unreasonably or the object is not hung tightly; People or other floating objects do not hang; ⑤The brakes or other brake safety devices fail and do not hang; ⑥The heavy objects are not hoisted when the crane is hoisted directly for processing; ⑦The objects are not hoisted when they are slanted and slanted; ⑧ Objects do not hang; ⑨ Objects buried in the ground should not be lifted; ⑩ Objects with corners and corners should not be hoisted if they are not properly padded; 3. If an abnormality is found, stop immediately, cut off the power supply, check the cause and eliminate it in time. 3. Precautions for safe operation after work: 1. Raise the hook to a certain height, park the cart at the designated position, and place the controller handle at the 'zero' position; pull down the knife switch and cut off the power supply. 2. Carry out daily maintenance. 3. Do a good job of handover. The above is the introduction to the operation precautions of single girder bridge crane. If necessary, please contact Hoisting Machinery Equipment Co., Ltd.!
It has become necessary for Wuxi Powerston Technology Co.,Ltd to continually cultivate, develop and update their skills to work successfully alongside high-tech.
The best way to confront your construction hoist suppliers
problem is to search for a high quality offered by Wuxi Powerston Technology Co.,Ltd at Powerston Construction Equipment. Take a look!
If you are looking for best product, then here are some product like suspended working platform, building material hoist and construction hoist suppliers in various styles which will surely meet your demand. Visit Powerston Construction Equipment to know more!