What should I pay attention to when using the newly purchased Guangzhou lifting platform? We all know that when a new car is just bought back, it takes a certain amount of time to run in. This is a process in which people and cars adapt to each other. As a machine, the lifting cage
platform also needs a running-in period. At this time, it is not only a process of man-machine adaptation, but also a process of equipment self-adaptation. Let me introduce to you what problems you should pay attention to during the running-in period of the Guangzhou lifting platform! 1. From the aspect of the machine itself, when the equipment is first used, it is also the period with the fastest wear rate. Due to the influence of factors such as the processing, assembly and adjustment of the parts of the lifting platform, the friction surface is rough, the contact area of u200bu200bthe mating surface is small, and the surface pressure is uneven. During the operation of the machine, the concave and convex parts on the surface of the parts fit and rub each other, and the metal scraps that fall off are used as abrasives to continue to participate in the friction, which accelerates the wear of the mating surface of the parts. Therefore, during the running-in period, it is easy to cause wear of the parts (especially the mating surface), and the wear rate is fast. At this time, if you do not pay attention to maintenance, but perform overload work, the damage of the lifting platform will be accelerated earlier. 2. The maintenance and lubrication of mechanical equipment is the same as feeding the machine. If the lubrication is not good, the fitting clearance of the newly assembled parts of the lifting cage platform is small, and due to assembly and other reasons, it is difficult to ensure the uniformity of the fitting clearance. Lubricating oil is not easy to form a uniform oil film on the friction surface to prevent wear. Thereby reducing the lubrication efficiency, causing the early abnormal wear of the machine parts. In severe cases, it will cause scratches or seizures on the friction surface of the precision fit, leading to failures. 3. Newly processed equipment is prone to loose parts. In the early stage of use, due to alternating loads such as impact and vibration, as well as heat, deformation and other factors, plus excessive wear and other reasons, it is easy to make the original tightened The parts are loose. Therefore, always check whether the parts of the equipment are loose. 4. Leakage may also occur due to the tight sealing. Affected by the loosening, vibration and heat of the machine, there will be leakage in the sealing surface of the machine and the pipe joints; some defects such as casting and processing are difficult to find during assembly and debugging, but due to the vibration during the operation , Impact, this defect is exposed, manifested as oil leakage. Therefore, leakage is prone to occur during the running-in period. 5. It takes a certain amount of time for operators and equipment to run-in. Operators must read the manual and precautions before use, and understand the performance and principle of the machine, so as to avoid serious accidents due to improper operation. 143.
Whenever the question of suspended working platform
building material hoist is raised, one comes across the term ''.
Wuxi Powerston Technology Co.,Ltd offers best-in-class products, fast delivery time, and personable, highly competent, and unparalleled services.
Deeper connections between Wuxi Powerston Technology Co.,Ltd and customers can be made when we're thinking out of the box and meeting outside of manufacturing work.