Logo
News
Powerston Welcomes Namibian Clients For Factory Inspection And Friendly Technical Discussion
Recently, a delegation from Namibia paid a visit to the production base of **Wuxi Powerston Technology Co., Ltd.** (POWERSTON) in Yixing, Jiangsu. The trip combined a workshop walkthrough, hands-on inspection of suspended platforms, mast climbing work platforms and access hoists, and a round of friendly technical talks between the two sides. This article records what the delegation saw on the floor, the equipment reviewed, and the topics that came up during the exchange.


Why a Factory Visit Matters for Access Equipment Buyers

 
For customers sourcing facade access machinery, catalog pictures and datasheets only say so much. Looking at the welding, galvanizing, guard mesh and electrical assembly in person answers questions that a quotation cannot. Powerston has been exporting working-at-height equipment for more than 18 years, and this Namibian visit followed the same practice the company offers every overseas client: compare finished machines, examine key components, and talk through real site conditions before an order is confirmed.
 
 

Workshop Tour: Equipment Reviewed on the Floor

 

Suspended Platform (Hanging Basket)

 
The delegation's first stop was an assembled galvanized suspended platform parked outside the workshop. The visitors, wearing safety helmets, studied the truss-rail basket frame, the non-slip checker-plate floor, the side guard rails, and the blue electrical control cabinet mounted at the end of the deck. Powerston's engineers pointed out how the basket sections bolt together, where the hoist and safety lock mount, and how platform length can be configured to fit different facade spans.
 
> Photo: Namibian clients and Powerston staff inspecting the galvanized suspended platform outside the workshop.

Most building projects in Namibia involve mid-rise residential blocks, commercial facades and renovation work, so the discussion focused on basket load capacity, wire rope safety, corrosion resistance in dry and coastal climates, and the spare-parts package shipped with each unit.
 

Mast Climbing Work Platform

 
Inside the main workshop, the group moved to a red mast climbing work platform fitted with perforated mesh guard panels and a rack-and-pinion mast. The visitors stepped onto the deck to check guard rail height, the access ladder, mast tie-in points and the base frame. Powerston staff walked through the lifting mechanism, counterweight arrangement, and the emergency stop and braking devices built into the unit.
 
> Photo: Delegates on the mast climbing work platform, inspecting the guard panels and mast section.
 
A second, larger mast climber stood further down the production line. After comparing the two configurations, the three representatives posed for a group photo beside the red structure.

> Photo: Group photo in front of the large mast climbing platform in the Powerston workshop.


Winch Motors, Cables and Base Components

 
Before the meeting-room session, the team inspected bench-mounted components: a traction hoist with its geared motor, hanging chain, and a spread of power and control cables in different colours. Later, they bent down to examine a red base frame whose bogie wheels were still wrapped in protective film, checking wheel mounting, frame welding and adjustment points.
 
> Photo: Inspection of the hoist motor and cable assembly on the workshop bench.
 
> Photo: Reviewing the base frame bogie wheels before final assembly.

These component-level checks matter because the hoist motor, brake and wire rope determine how safely a suspended platform performs over its service life. The Namibian guests asked about motor duty rating, gearbox lubrication, brake inspection intervals, and replacement lead times for the African market.

 

Topics Covered in the Technical Discussion

 
After the workshop tour, both sides sat down for a friendly exchange. The table below summarizes the main points on the agenda.
 
Discussion topic What was reviewed
Site conditions in Namibia Building heights, facade materials, wind exposure, transport routes to the job site
Equipment selection Suspended basket, mast climber and building hoist matched to each planned project
Compliance and certification CE and EAC certificates, load testing, safety device configuration
After-sales support Spare parts, wiring diagrams, operator training, remote technical response
Commercial terms MOQ, packaging, shipping arrangement, lead time for follow-up orders


Product Lines Presented

 
During the exchange, the Powerston team presented the full range of vertical access and working-at-height solutions the factory builds.

Product line Typical application
Suspended platforms (ZLP baskets) Facade cleaning, painting, curtain wall installation, renovation
Mast climbing work platforms Large facade finishing, cladding, bridge and industrial structure work
Building hoists / passenger hoists Personnel and material vertical transport on construction sites
Material hoists Bulk material lifting for mid-rise and warehouse projects
Building Maintenance Units (BMU) Permanent facade access on high-rise commercial buildings

 

Quality Assurance Behind the Machines

 
Powerston's production base is equipped with laser cutting, pipe cutting, bending and drilling-milling equipment, and every machine leaves the workshop after load and function testing. The factory holds CE and EAC certification. The Namibian delegation reviewed the testing procedures, welding standards, and the paint and galvanizing treatment applied to the steel structure. For overseas customers, the company also prepares assembly manuals, electrical diagrams and a spare-parts list before shipment.
 
 

Looking Ahead: A Practical Basis for Cooperation

 
The visit closed with a group photo and a relaxed exchange of impressions. Both sides agreed that seeing the equipment on the factory floor made the follow-up conversation more concrete: the Namibian team now has a clearer picture of Powerston's construction access equipment, and Powerston's engineers understand the project requirements and climate conditions the machines will face in Namibia.
 
Powerston continues to welcome overseas clients who want to inspect the workshop, test the machines and discuss custom configurations. For enquiries about suspended platforms, mast climbers, building hoists, material hoists or BMUs, contact the Powerston sales team at [email protected] or visit www.powerston.com.
 

TOP